Navigation
 Portail
 Index
 Membres
 Profil
 FAQ
 Rechercher
MISES A JOURS FIRMWARE (VERSION PEDALIER)

Dim 25 Oct 2015 - 2:19 par Alexdreamworld

Dernières mises à jour et corrections en date:

Helix Firmware v2.70 Release Notes


Nouvelle mise à jour sortie le 17/10/2018!

2.70 "The Marketplace Update"
New Features (Firmware 2.70)

       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand corner of HX Edit, click "My Account" and then choose "Get More Presets..." or "Get More IRs..."
       Three New Tuner Types—From the Tuner page, turn the Type knob to choose between "Fine" (color-changing needle tuner with fine tuning bar), "Coarse" (color-changing needle tuner with no fine tuning bar), and "Strobe". SEE IMPORTANT KNOWN ISSUE BELOW*

New Features (Helix Native 1.70)

       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by …


Commentaires: 0

MISES A JOURS LOGICIEL EDITEUR WINDOWS et MAC

Ven 30 Oct 2015 - 18:58 par Alexdreamworld

HX Edit v2.70 Release Notes


Nouvelle mise à jour sortie le 16/10/2018!

2.70 "The Marketplace Update"
New Features (Firmware 2.70)

       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand corner of HX Edit, click "My Account" and then choose "Get More Presets..." or "Get More IRs..."
       Three New Tuner Types—From the Tuner page, turn the Type knob to choose between "Fine" (color-changing needle tuner with fine tuning bar), "Coarse" (color-changing needle tuner with no fine tuning bar), and "Strobe". SEE IMPORTANT KNOWN ISSUE BELOW*

New Features (Helix Native 1.70)

       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand …


Commentaires: 0


La nouvelle mise à jour 2.60 pour HELIX et le soft Native 1.60 sont  disponibles depuis le 02/07/2018

Aller en bas

La nouvelle mise à jour 2.60 pour HELIX et le soft Native 1.60 sont  disponibles depuis le 02/07/2018

Message par Alexdreamworld le Mer 4 Juil 2018 - 12:45

Helix/HX Firmware 2.60 “The Spring Cleaning Update”

New Amp Models (2—Helix, Helix Rack/Control, Helix LT only)

   Cali Texas Ch1, based on* the clean channel of the MESA/Boogie®️ Lonestar
   Placater Clean, based on* the clean channel of the Friedman BE-100

New Effects Models (4)

   Distortion > Deranged Master (Mono, Stereo), based on* the Dallas Rangemaster Treble Booster—WARNING! Like the real thing, this model can take your head off! Works best before a distorted amp
   Distortion > Deez One Vintage (Mono, Stereo), based on* the BOSS©️ DS-1 distortion pedal (classic Made-in-Japan version)
   Distortion > Deez One Mod (Mono, Stereo), based on* the BOSS©️ DS-1 distortion pedal (Keeley mod version)
   Looper > 1 Switch Looper (Mono, Stereo), Line 6 original (doesn't leave Stomp mode)

* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.

Using the 1 Switch Looper:

   Add a Looper > 1 Switch Looper block to your preset and assign it to a stomp footswitch. (Adding a 1 Switch Looper to HX Effects from Stomp view automatically assigns it to the selected footswitch.)
   Press the 1 Switch Looper switch. The LED lights red, indicating the loop is recording.
   Press the 1 Switch Looper switch again. The LED lights green, indicating the loop is playing back.
   Press the 1 Switch Looper switch again. The LED lights amber, indicating the loop is in overdub mode. Subsequent presses of the switch toggle between play and overdub mode.
   While the 1 Switch Looper is in play or overdub mode, press and hold the switch for 1 second. The most recent recording is undone. Holding the switch again will redo the recording. On Helix, Helix Rack/Control, and HX Effects, “UNDO” or “REDO” briefly appears on the scribble strip. On Helix LT, “UNDO” or “REDO” briefly appears in Performance view.
   Quickly double-press the 1 Switch Looper switch. Playback/recording stops and the LED lights white, indicating a loop is in memory.
   While Looper playback/recording is stopped, press and hold the switch. The recording is deleted and the LED lights dim white.

Improvements/Changes

   The most recent new HX Reverb models have been tweaked to sound notably wetter (see Known Issues below)
   When changing the Time parameter, Legacy delay models now exhibit a more organic behavior (more like DL4 and Echo Pro)
   The Looper block is now called “6 Switch Looper” (see Known Issues below)
   Synchronizing to incoming MIDI clock has been improved
   The Mix parameter defaults of both mono and stereo HX Reverbs are now consistent
   When loading a preset, its default MIDI program change message would be transmitted after the preset is loaded and any Instant commands were sent. This PC message is now sent immediately when the preset is selected
   Helix, Helix Rack/Control, Helix LT only: Shuriken Variax bank names now appear in the Input > Multi and Input > Variax block without requiring connection to Variax Workbench
   HX Effects only: On the Signal Flow page, if the Split block is selected and bypassed, it now appears with a different icon than when it’s enabled
   Many under-the-hood improvements

Bug Fixes

   The Filter > Legacy > Obi Wah model is mono (should be stereo) — FIXED
   Modulation > Legacy > Analog Chorus > Mode parameter was mislabeled “CH Vib” — FIXED
   Pitch/Synth > Legacy > Smart Harmony > Key parameter was mislabeled “V1 Key” — FIXED
   Helix, Helix Rack/Control, Helix LT only: After selecting a different preset, the Tempo > Preset BPM value display would not be updated — FIXED
   Helix, Helix Rack/Control, Helix LT only: While the Looper (now 6 Switch Looper) is in playback mode, the LED on FS9 (Play/Stop) will go dim when exiting and then returning to Looper view — FIXED
   Helix, Helix Rack/Control, Helix LT only: When the Tuner > Output routing is set to USB 5/6, the audio can instead be routed to USB 3/4 — FIXED
   Helix, Helix Rack/Control, Helix LT only: If an Input block on Path 2A or 2B is set to “None,” its Input gate remains active if previously engaged — FIXED
   Helix, Helix Rack/Control, Helix LT only: If Global Settings > EXP Pedals > EXP 1 Polarity is set to “Inverted,” EXP 2 Polarity could be affected — FIXED
   Helix, Helix Rack/Control, Helix LT only: If a single Stomp mode footswitch is assigned to a block bypass and more than one parameter assignment, repeatedly touching the switch may not cycle through all assignments — FIXED
   Helix, Helix Rack/Control, Helix LT only: Saving a preset with a Command Center Note On command can reset the note value to C-1 when quickly changing snapshots — FIXED
   Helix, Helix Rack/Control, Helix LT only: In some cases, Command Center CC Toggle messages are not sent when selecting snapshots — FIXED
   Helix Rack/Control only: In rare cases, if the current preset in Helix Rack is particularly DSP-intensive and an expression pedal is connected to Helix Control, recalling a different preset or snapshot can cause Helix Control to freeze — FIXED
   Helix Rack/Control only: In rare cases, while quickly navigating presets, the preset name displayed on Helix Rack can sometimes not match that on Helix Control — FIXED
   HX Effects only: The Delay > Stereo > Multi Pass block in some factory presets appeared only with the left channel active — FIXED
   HX Effects only: Looper (now 6 Switch Looper) playback/recording can sometimes stop when changing presets, even if the target preset has the same type of looper (mono or stereo) — FIXED
   HX Effects only: In some cases, the Looper (now 6 Switch Looper) can continue to play when selecting an empty preset with no Looper block — FIXED
   HX Effects only: Selecting the Distortion > Thrifter Fuzz model can result in a brief thump accompanied by a high whine — FIXED
   HX Effects only: If a controller is assigned to a Modulation > Pattern Trem block parameter and the min value is greater than the max value, moving the controller can cause HX Effects to freeze — FIXED
   HX Effects only: Under rare, specific circumstances, parameters assigned to Note values could sometimes reset when recalling snapshots — FIXED
   HX Effects only: Loading certain presets can cause some model blocks to appear as None blocks — FIXED
   HX Effects only: Copying and pasting a block with many controller assignments can delete all controller assignments (and cause subsequent errors) after saving and then recalling the preset — FIXED
   HX Effects only: When Global Settings > Switches >  Stomp mode is set to “4 Switches,” the Looper (now 6 Switch Looper) could sometimes fail to display Record and Undo switches — FIXED
   HX Effects only: After a factory reset, recording a loop and then saving the preset could result in the loop being cleared — FIXED
   HX Effects only: The Split block’s bypass state could sometimes not be recalled via snapshots — FIXED
   HX Effects only: Receiving MIDI CC69 messages to recall snapshots can sometimes result in unpredictable block bypass states — FIXED
   HX Effects only: Attempting to assign a block to a footswitch that already has eight assignments can result in clearing one or more original assignments — FIXED
   HX Effects only: In rare cases, assigning the same EXP pedal to the same parameter twice in a row via Learn Controller can cause a scribble strip’s contents to disappear — FIXED
   HX Effects only: Adjusting a parameter with an expression pedal while holding TAP/TUNER can result in the block’s parameters appearing in Tuner view — FIXED
   HX Effects only: When receiving an MIDI CC52, CC53, or CC54 message, HX Effects does not respond as expected — FIXED
   HX Effects only: When a Send 1/2 Output block is selected, parameters in the Controller Assign are incorrect — FIXED
   HX Effects only: After assigning a controller to the Pitch/Synth > Simple Pitch > Interval parameter, it appears as “-2147483” in parameter spill view — FIXED
   HX Effects only: Certain parameters with both positive and negative values can sometimes cause the Controller Assign menu’s Min Value and Max Value parameter sliders to not reflect the correct value — FIXED
   HX Effects only: After assigning a footswitch to parameter control via Controller Assign’s FS3 (Learn), relearning a MIDI CC message results in HX Effects automatically applying CC4, regardless of the CC# received — FIXED
   HX Effects only: Looper (now 6 Switch Looper) Undo function would not undo the most recent overdub — FIXED
   HX Effects only: While performing a Factory Reset, turning knobs 1-3 could cause Global Settings to appear above Footswitch 2 — FIXED
   HX Effects only: If a Wah block is changed to a Looper block, the Looper’s Playback parameter is automatically assigned to EXP 2 — FIXED
   HX Effects only: After clearing three or more Command Center assignments, all saved Command Center snapshot data can be inadvertently cleared — FIXED
   HX Effects only: In rare cases, duplicate Command Center Instant commands can be transmitted when selecting snapshots — FIXED
   HX Effects only: When Global Settings > Pedals > EXP 1 Position or EXP 2 Position is set to “Global”, expression position may not always affect parameters globally — FIXED
   HX Effects only: After saving a preset, HX Effects would sometimes not display the most recently accessed block on a footswitch assigned to multiple blocks — FIXED
   HX Effects only: When the Tuner output is set to Send 1/2, signal flow audio sent to Send 1/2 can be muted — FIXED
   HX Effects only: In rare, specific circumstances, Command Center MIDI Bank/Prog and CC values can be inadvertently altered when changing snapshots — FIXED
   HX Effects only: Assigning 11 (!) parameters to a single controller, copying/pasting the block, and then moving the controller can cause HX Effects to freeze — FIXED
   HX Effects only: If the Mixer block is moved to Path B, moving the block would cause its parameters above Footswitch 3 to disappear — FIXED
   HX Effects only: While in the Save Preset menu, touching the TAP/TUNER switch to open the Tempo Panel will reset any recent custom name or save destination — FIXED
   HX Effects only: In some cases, manually setting a Wah, Volume, or Pitch Wham’s switch assignment can result in odd parameter slider behavior — FIXED
   HX Effects only: In the Command Center, any Bank/Prog message’s CC00, CC32, and Prog parameters could not contain have a value of 0 — FIXED
   HX Effects only: If a block has a dual-state parameter assigned to a different footswitch, copying and pasting the block to another switch can fail to display white controller nodes and sometimes may freeze the UI — FIXED
   HX Effects only: Receiving a MIDI CC68 message does not open and close the Tuner view — FIXED
   HX Effects only: In some cases, Send 1/2 & Main L/R Pan and Level parameter settings are reflected across preset changes — FIXED
   HX Effects only: Snapshot names can sometimes fail to appear on the scribble strips — FIXED
   HX Effects only: EXP 1 and 2 would behave as if it was set to “Per Preset”, even when set to “Global” — FIXED
   Many other minor bug fixes and optimizations

Known Issues

   As the new HX Reverb models have been tweaked to sound notably “wetter”, any existing user presets that use these models will sound different. Although Helix and HX hardware has the ability to compensate for changes made to models when rebuilding presets (and one of our goals is to rarely if ever cause audible changes to existing user presets), the improvements made to the reverb blocks unfortunately cannot be compensated for
   Existing user presets containing Helix’s classic Looper block will continue to read “Looper” instead of “6 Switch-Looper” until the model is changed and the preset is re-saved. This is normal and does not affect operation
   In rare cases, pitch artifacts may be heard on selected delay blocks when the Time parameter is set to Note Sync values higher than 1/2 Triplet



HX Edit 2.60 Release Notes

HX Edit 2.60 “The Spring Cleaning Update”

New Amp Models (2)

   Cali Texas Ch1, based on* the clean channel of the MESA/Boogie®️ Lonestar
   Placater Clean, based on* the clean channel of the Friedman BE-100

New Effects Models (4)

   Distortion > Deranged Master (Mono, Stereo), based on* the Dallas Rangemaster Treble Booster—WARNING! Like the real thing, this model will take your head off! Works best before a distorted amp
   Distortion > Deez One Vintage (Mono, Stereo), based on* the BOSS©️ DS-1 distortion pedal (classic Made-in-Japan version)
   Distortion > Deez One Mod (Mono, Stereo), based on* the BOSS©️ DS-1 distortion pedal (Keeley mod version)
   Looper > 1 Switch Looper (Mono, Stereo), Line 6 original (doesn't leave Stomp mode)

* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.

Improvements/Changes

   The Looper block is now called “6 Switch Looper” (see Known Issues below)
   Variax Shuriken bank names now appear in the Input > Multi and Input > Variax block without requiring connection to Variax Workbench
   HX Edit now remembers its window size after disconnecting the Helix/HX device


New Features

   Full editor support for HX Effects—HX Edit now includes parameter, signal flow, bypass/controller assign, and Command Center editing for HX Effects
   Block Copy/paste between HX Edit and Helix Native—HX Edit now lets you copy and paste individual blocks between it and the Helix Native plugin
   Snapshot colors—HX Edit now lets you set footswitch colors for snapshots. Control-click on the camera icon and from the pull-down menu, select a color

Bug Fixes

   In some cases, copying/pasting or exporting/importing a preset can result in some blocks reflecting incorrect bypass states — FIXED
   Selecting a different model while the Customize window is open can cause the previous model’s name to be assigned to the footswitch — FIXED
   In rare cases, after clearing a controller assignment from a parameter, the preset cannot be saved properly — FIXED
   On MacOS, pressing Command-R to rename presets twice in a row can cause a graphical glitch and prevent the preset from being renamed — FIXED
   Modulation > Legacy > Analog Chorus > Mode parameter was mislabeled “CH Vib” — FIXED
   Pitch/Synth > Legacy > Smart Harmony > Key parameter was mislabeled “V1 Key” — FIXED
   Copying/pasting a Command Center > Instant or Footswitch command may not update the Command Center window — FIXED
   Copying/pasting a block does not copy/paste any MIDI bypass assignment — FIXED
   If a snapshot-controlled parameter value is changed, pressing Snapshot Up/Down switches on the hardware can cause the Command Center window to not update properly — FIXED
   Assigning MIDI bypass to a block would not display it in the Bypass/Controller assignment list — FIXED
   Loading a preset from HX Edit while selecting a snapshot from the hardware can result in an error message — FIXED
   In some cases, disconnecting and then reconnecting the hardware can cause the Presets and Impulses tab graphics to disappear until HX Edit’s window is closed and then reopened — FIXED
   When moving blocks along the signal flow in HX Edit, the Helix hardware could sometimes reflect an inaccurate bypass state — FIXED
   Helix, Helix Rack/Control, Helix LT only: In HX Edit, changing the cab model in an Amp+Cab block can clear controllers assigned to the Amp’s parameters — FIXED
   Helix, Helix Rack/Control, Helix LT only: Moving a Split or Merge block down to Path B while a None block is selected can sometimes cause HX Edit to crash — FIXED
   Helix, Helix Rack/Control, Helix LT only: Copying/pasting multiple presets in the MacOS version of HX Edit and then immediately sending MIDI clock to the hardware can sometimes cause it to crash — FIXED
   Helix, Helix Rack/Control, Helix LT only: On presets with an Input block on Path 1A, changing the (inactive) Split type can cause Inputs 1A and 2A to be fed the wrong signal — FIXED
   Helix, Helix Rack/Control, Helix LT only: When assigning the Guitar In-Z parameter to a footswitch, a custom name and LED color could not be applied — FIXED
   Helix LT only: Renaming a preset above the signal flow in HX Edit would not always update the preset name on Helix LT’s main display — FIXED
   HX Effects only: From the Impulses tab, attempting to clear an IR can sometimes result in an error message — FIXED
   Many other minor bug fixes, optimizations, and stability improvements

Known Issues

   Existing user presets containing the original 6-switch Looper block will continue to read “Looper” instead of “6 Switch Looper” until the model is changed and the preset is resaved. This is normal and does not affect operation
   HX Effects only: Connecting HX Effects to HX Edit after a Helix, Helix Rack/Control, or Helix LT has been connected can cause presets to not save correctly. WORKAROUND: Quit HX Edit, reboot HX Effects, and then restart HX Edit. This will properly restore device communication
[/b][/size][/color]


Helix Native 1.60 “The Spring Cleaning Update”

Helix Native 1.60 “The Spring Cleaning Update”

Helix Native delivers the same award-winning HX amp and effects modeling found in Line 6’s best-selling Helix hardware guitar and effects processors, bringing authentic tone to your favorite DAW.

Helix Native is available as a fully functional 15-day free trial, which requires a Line 6 account.

Learn more at http://line6.com/helix/helixnative.html.
New Amp Models (2)

   Cali Texas Ch1, based on* the clean channel of the MESA/Boogie®️ Lonestar
   Placater Clean, based on* the clean channel of the Friedman BE-100

New Effects Models (3)

   Distortion > Deranged Master (Mono, Stereo), based on* the Dallas Rangemaster Treble Booster—WARNING! Like the real thing, this model will take your head off! Works best before a distorted amp
   Distortion > Deez One Vintage (Mono, Stereo), based on* the BOSS©️ DS-1 distortion pedal (classic Made-in-Japan version)
   Distortion > Deez One Mod (Mono, Stereo), based on* the BOSS©️ DS-1 distortion pedal (Keeley mod version)

* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.
New Features

   MIDI block bypass—Helix Native now lets you bypass individual blocks via MIDI. Right-click (or Control-click) the desired block and from the pull-down menu, select MIDI Bypass > MIDI In. Then click the Automation/Controller Assign tab and choose the desired CC#. Note that there are lots of CCs that Helix Native will ignore, as these are reserved for Helix hardware functionality. See the Helix Native Pilot’s Guide for more information
   MIDI parameter control—Helix Native now lets you control parameters via MIDI. In the inspector, right-click (or Control-click) the desired parameter and from the pull-down menu, select Controller Assign > MIDI CC. Then click the Automation/Controller Assign tab and choose the parameter from the list. Adjust the MIDI CC#, Min, and Max Values
   MIDI snapshot select—To select a snapshot in Helix Native, send it a MIDI CC#69 message. Value 0 will recall Snapshot 1, Value 1 will recall Snapshot 2, Value 2 will recall Snapshot 3, and so on
   Block Copypaste between Helix Native and HX Edit/—Helix Native now lets you copy and paste individual blocks between plugin multiple instances and HX Edit. Right-click (or Control-click) the desired block and select Copy. Then switch to HX Edit and on the Signal Flow view, right click on the destination block (or an empty block location) and select Paste
   Helix Native now lets you copy and paste individual blocks after closing and then reopening the plugin window
   Helix Native now lets you copy and paste individual blocks between multiple instances

Improvements/Changes

   The most recent new HX Reverb models have been tweaked to sound notably wetter (see Known Issues below)
   When changing the Time parameter, Legacy delay models now exhibit a more organic behavior (like DL4 and Echo Pro)
   Helix, Helix Rack/Control, Helix LT only: Variax Shuriken bank names now appear in the Input > Multi and Input > Variax block without requiring connection to Variax Workbench
   Plug-in window now loads faster
   Many under-the-hood improvements

Bug Fixes

   DSP intensive presets with one or more Placater Amp+Cab, Amp, or Preamp blocks can sometimes generate an error message — FIXED
   The Filter > Legacy > Obi Wah model is mono (should be stereo) — FIXED
   Modulation > Legacy > Analog Chorus > Mode parameter was mislabeled “CH Vib” — FIXED
   PitchSynth > Legacy > Smart Harmony > Key parameter was mislabeled “V1 Key” — /FIXED
   Attempting to import a very long Impulse Response can sometimes result in Helix Native freezing — FIXED
   Clearing all setlists and presets does not clear preset names until the plugin window is closed and reopened — FIXED
   In some cases, tempo changes may not be properly recalled when Tempo is set to Per Snapshot — FIXED
   Moving the Merge > Mixer block to Path B and then moving it back to its original position on Path A can result in an error message — FIXED
   In some cases, Path 2B’s input cannot be set to Host — FIXED
   Many other minor bug fixes, optimizations, and stability improvements

Known Issues

   As the new HX Reverb models have been tweaked to sound notably “wetter”, any existing user presets that use these models will sound different. Although Helix and HX hardware has the ability to compensate for changes made to models when rebuilding presets (and one of our goals is to rarely if ever cause audible changes to existing user presets), the improvements made to the reverb blocks unfortunately cannot be compensated for.
   * In ProTools, the Compare function only loads the selected preset.
   In Logic 10.4.1, after moving an instance of Helix Native to another channel strip location, the Compare state can sometimes reverse.
   The DAW’s Compare function toggles between the two previously loaded presets, instead of toggling any edits made to the preset.
   A processing block cannot be moved between a Split or Mixer and another processing block.
   In Logic, switches 13-16, Master Input/Output, and Snapshot Index parameters are missing from the Automation lane list.

HAVE A GREAT IDEA FOR HELIX NATIVE?

If you have a great idea for Helix Native, we want to hear about it! Please visit *http://line6.ideascale.com* to post your requests and suggestions, or vote for features. This is the most direct way for you to influence our updates, and we look forward to hearing from you!
avatar
Alexdreamworld
Admin
Admin

Date d'inscription : 25/10/2015
Localisation : France

http://line6helix.forumactif.org

Revenir en haut Aller en bas

Revenir en haut

- Sujets similaires

 
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum