Navigation
 Portail
 Index
 Membres
 Profil
 FAQ
 Rechercher
MISES A JOURS FIRMWARE (VERSION PEDALIER)

Dim 25 Oct 2015 - 2:19 par Alexdreamworld

Dernières mises à jour et corrections en date:

Helix Firmware v2.21 Release Notes


Nouvelle mise à jour sortie le 27/04/2017!

Helix Firmware 2.21 Release Notes

Helix v2.21.0 is a firmware update that includes new fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! YOU *MUST* FOLLOW THESE INSTRUCTIONS TO INSTALL 2.21!

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, browsers, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs (if you want to keep them). For example, if you’re running Helix FW 2.00, your current Helix application version should be 2.00.

3. Quit the CURRENT EXISTING Helix editor application and download and install the LATEST Helix editor application (2.20), available here: [Vous devez être inscrit et connecté pour voir ce lien] This also installs the newest version of Line 6 Updater …


Commentaires: 0

MISES A JOURS LOGICIEL EDITEUR WINDOWS et MAC

Ven 30 Oct 2015 - 18:58 par Alexdreamworld

Helix Editor v2.21 Release Candidate Notes


Nouvelle mise à jour sortie le 02/05/2017!

Helix Editor 2.21 Release Notes

Helix v2.21.0 is a software update that includes fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! IF YOU’VE ALREADY INSTALLED HELIX FIRMWARE 2.21 and HELIX EDIT 2.20, ALL YOU HAVE TO DO IS INSTALL HELIX EDIT 2.21.

IF YOU HAVE NOT INSTALLED HELIX FIRMWARE 2.21 and HELIX EDIT 2.20, YOU *MUST* FOLLOW THESE INSTRUCTIONS!

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, browsers, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs (if you want to keep them). For example, if you’re running Helix FW 1.12, your current Helix application version should be 1.12.

NOTE: You may want to back up individual Setlists so you can restore them to empty setlists without …


Commentaires: 0


LOGICIEL DE LA MISE A JOUR POUR LE FIRMWARE

Voir le sujet précédent Voir le sujet suivant Aller en bas

LOGICIEL DE LA MISE A JOUR POUR LE FIRMWARE

Message par Alexdreamworld le Ven 30 Oct 2015 - 20:29

Line 6 Updater 1.11:


This update includes minor big fixes.

Lien de Téléchargement:

Windows

Mac



Line 6 Updater 1.10:


This update adds support for Spider V.

Lien de Téléchargement:

Windows

Mac



Line 6 Updater 1.09:


This update includes minor bug fixes.

Lien de Téléchargement:

Windows

Mac

Line 6 Updater 1.08:


This update adds support for new products.

Lien de Téléchargement:

Windows

Mac



Line 6 Updater 1.07:


This update adds support for new products.

Lien de Téléchargement:

Windows

Mac



Line 6 Updater 1.04:

This update adds support for Windows 10 and OS X 10.11

Line 6 Updater v1.04 for PC can be used to update the Relay G70 Receiver, Relay TB516 G Transmitter, Helix, AMPLIFi and Firehawk firmware, via USB.

AMPLIFi and Firehawk customers: Download and install the latest AMPLIFi or Firehawk driver from Line6.com.

Please connect your device directly to a USB 2.0 port on your PC. USB hubs are not supported.

IMPORTANT UPDATE FOR RELAY G70 AND RELAY TB516 G

Please install firmware v1.03 on the Relay G70 receiver and on the Relay TB516 G transmitter for improved performance.

Improved synchronization
Improved antenna switching performance
For updating the Relay G70 Receiver:

Please connect the Relay G70 Receiver to your PC through USB, and power the receiver on. The G70’s display should remain on the “LINE 6” screen, indicating it is ready for update. If it does not remain on that screen (i.e., if it boots completely), please turn the receiver off and back on until the “LINE 6” screen remains. In some cases with certain USB ports, it is possible that this may take more than one attempt. Once the “LINE 6” screen remains on your G70, please launch the Line 6 Updater app and follow the instructions that appear to update your device.

For updating the Relay TB516 G Transmitter:

Please remove the batteries from the Relay TB516 G Transmitter before connecting it to your PC through USB. Once the batteries are removed please connect your transmitter to the PC. The very first time you connect the transmitter to a new USB port, you may see a window indicating that a USB driver is being installed. If this occurs, please wait until that driver installation process is complete (this may take around two minutes, or longer in some cases). Next, please launch the Line 6 Updater app, and follow the instructions that appear in order to update your device.

If the updating process should fail for any reason, please follow these instructions:

For the Relay G70 Receiver:

Please disconnect the G70 receiver from your computer’s USB and close the Line 6 Updater app.
Reconnect the receiver to your computer’s USB and make sure its power switch is in the “I” (on) position.
The receiver should display “LINE 6” and this should remain on the display. If it does not, please disconnect the G70 receiver and then reconnect it to your computer’s USB, so that you see it continues to display “LINE 6”. In some cases, it is possible that this may take more than one attempt. Once the “LINE 6” screen remains displayed on your G70, please launch the Line 6 Updater app again, sign in with your Line 6 username and password, and follow the instructions that appear to update your Relay G70 Receiver.
For the Relay TB516 G Transmitter:

Please disconnect the transmitter from your computer’s USB and close the Line 6 Updater app.
Insert a pair of batteries into the transmitter.
Power the transmitter on and leave it on for at least 5 seconds.
Power the transmitter off.
Remove the batteries from the transmitter.
Reconnect the transmitter to your computer’s USB.
Launch the Line 6 Updater app again, sign in with your Line 6 username and password, and follow the instructions that appear to update your Relay TB516 G Transmitter.

Lien de Téléchargement:

Windows

Mac
avatar
Alexdreamworld
Admin
Admin

Date d'inscription : 25/10/2015
Localisation : France

http://line6helix.forumactif.org

Revenir en haut Aller en bas

Voir le sujet précédent Voir le sujet suivant Revenir en haut

- Sujets similaires

 
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum