Navigation
 Portail
 Index
 Membres
 Profil
 FAQ
 Rechercher
MISES A JOURS FIRMWARE (VERSION PEDALIER)

Dim 25 Oct 2015 - 2:19 par Alexdreamworld

Dernières mises à jour et corrections en date:

Helix Firmware v2.70 Release Notes


Nouvelle mise à jour sortie le 17/10/2018!

2.70 "The Marketplace Update"
New Features (Firmware 2.70)

       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand corner of HX Edit, click "My Account" and then choose "Get More Presets..." or "Get More IRs..."
       Three New Tuner Types—From the Tuner page, turn the Type knob to choose between "Fine" (color-changing needle tuner with fine tuning bar), "Coarse" (color-changing needle tuner with no fine tuning bar), and "Strobe". SEE IMPORTANT KNOWN ISSUE BELOW*

New Features (Helix Native 1.70)

       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by …


Commentaires: 0

MISES A JOURS LOGICIEL EDITEUR WINDOWS et MAC

Ven 30 Oct 2015 - 18:58 par Alexdreamworld

HX Edit v2.70 Release Notes


Nouvelle mise à jour sortie le 16/10/2018!

2.70 "The Marketplace Update"
New Features (Firmware 2.70)

       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand corner of HX Edit, click "My Account" and then choose "Get More Presets..." or "Get More IRs..."
       Three New Tuner Types—From the Tuner page, turn the Type knob to choose between "Fine" (color-changing needle tuner with fine tuning bar), "Coarse" (color-changing needle tuner with no fine tuning bar), and "Strobe". SEE IMPORTANT KNOWN ISSUE BELOW*

New Features (Helix Native 1.70)

       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand …


Commentaires: 0


MISES A JOURS LOGICIEL EDITEUR WINDOWS et MAC

Aller en bas

MISES A JOURS LOGICIEL EDITEUR WINDOWS et MAC

Message par Alexdreamworld le Ven 30 Oct 2015 - 18:58

HX Edit v2.70 Release Notes

Nouvelle mise à jour sortie le 16/10/2018!

2.70 "The Marketplace Update"
New Features (Firmware 2.70)

       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand corner of HX Edit, click "My Account" and then choose "Get More Presets..." or "Get More IRs..."
       Three New Tuner Types—From the Tuner page, turn the Type knob to choose between "Fine" (color-changing needle tuner with fine tuning bar), "Coarse" (color-changing needle tuner with no fine tuning bar), and "Strobe". SEE IMPORTANT KNOWN ISSUE BELOW*

New Features (Helix Native 1.70)

       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand corner Helix Native, click "My Account" and then choose "Get More Presets..." or "Get More IRs..."

New Features (HX Edit 2.70)

       Adds support for HX Stomp
       Marketplace support—Marketplace is a new online destination that lets users purchase presets and impulse responses created by select third-party content gurus. From the lower left-hand corner of HX Edit, click "My Account" and then choose "Get More Presets..." or "Get More IRs..."
       Multi-device support—HX Edit now opens a new window when multiple Helix or HX boxes are connected. For example, if you have Helix Floor and your bass player has HX Stomp, you can now connect both and quickly and easily copy and paste individual blocks back and forth. Windows can also be manually opened and closed from the Devices pull-down menu

Improvements

       The tuner now accurately tunes notes down to 21.83 Hz (low F) for 5-string basses
       HX Stomp only—Shortcut: If HX Stomp is in Preset or Snapshot mode, or FS3 in Stomp and Scroll mode has been assigned to something other than TAP/TUNER, you can now press ACTION and PAGE> together to open the Tuner screen
       HX Stomp only—Shortcut: Press ACTION andPreferences > Snapshot Edits value

Bug Fixes

       Helix Floor, Rack, LT only—A couple of amp models (including Cali Texas Ch 2) have their polarity reversed. When combined with another amp in parallel, this could cause phase cancellation. NOTE: This may affect the sound of some presets, especially if you swapped the polarity of Path B in the mixer block — FIXED
       Helix Floor, Rack, LT only—Amp > Cali Texas Ch 1 could gradually decrease in level when Mid and/or Bass parameters are set to 0.0 — FIXED
       Helix Floor, Rack, LT only—Delay models with two Time parameters could sometimes reset note divisions when changing snapshots — FIXED
       HX Effects only—Clearing or cutting a block on Path B from HX Edit could sometimes HX Effects to freeze when in stomp footswitch mode — FIXED
       HX Effects only—Switching from a preset with a Split > Crossover block to a preset with a Split > A/B block could sometimes cause HX Effects to freeze — FIXED
       HX Effects only—When EXP Position is set to Global, the expression pedal's position could not be recalled immediately after switching presets, which could cause undesired signals to pass through — FIXED
       HX Effects only—In rare cases, exiting the Tuner could sometimes slightly adjust signal level and tone — FIXED
       HX Effects only—When connecting both left and right inputs, exiting the tuner could sometimes cause the right side of certain effects blocks to not be heard
       HX Effects only—In very rare cases, engaging a certain combination of footswitches while connected to HX Edit and then power cycling HX Effects could clear certain blocks — FIXED
       HX Effects only—From HX Edit, copying and pasting an Output block over itself could sometimes paste Mixer parameters — FIXED
       HX Effects only—Switching Global Settings > MIDI/Tempo > Tempo Select values while transmitting MIDI clock could sometimes result in sending incorrect tempi — FIXED
       HX Effects only—After resetting Global Settings, Tap Tempo could become unresponsive while receiving MIDI Clock — FIXED
       HX Effects only—HX Edit would not reflect the Looper > 1 Switch Looper's bypass status — FIXED
       HX Effects only—Mixer parameter values could inadvertently be copied into new empty presets — FIXED
       HX Effects only—Quickly changing snapshots from HX Edit could sometimes cause hardware and software to disconnect — FIXED
       Helix Native only—Control/Command-click on parameter slider would not always snap to the hardware's default value — FIXED
       Many other minor bug fixes and improvements

Known Issues

   *IMPORTANT: The three new tuner types only appear for those registered users who didn't complain incessantly about Helix's previous tuner on social media. For those who did complain (AND WE KNOW WHO YOU ARE), the new tuner will be unlocked once you perform ONE of the following:
   Post a photo of yourself on the Helix Facebook Group with the "X" logo written on your forehead in black Sharpie (washable magic marker is acceptable). The admins have been given the authority to unlock units with flagged serial numbers; assuming business hours, please allow 1-2 hours for the new tuner page to be unlocked (NOTE: You may have to restart Helix/HX for the new tuner page to appear)
   Post a meme of Arnold Schwarzenegger from Kindergarten Cop yelling "IT'S NOT A TUNAAHH!" on either the Line 6 Helix—or—The Gear Page > Digital and Modeling Gear forum. Be sure to use the proper Impact font. Memes will not be judged for their artistic merit, although the spelling must be correct. Again, admins have been given the authority to unlock units with flagged serial numbers
   If you'd prefer to participate silently, you may instead manually rename 47 presets "Patience is Key" (NOTE: Will not work from HX Edit; nor can you just copy one "Patience is Key" preset into 46 additional locations. You must manually rename each one. Once all 47 presets have been named correctly, the inspector [or FS5 on HX Effects] will read "Tuners unlocked!")
   HX Effects only—When Tuner Type is set to "Strobe" and your string is waaay out of tune, the graphic tuner nodes may appear a bit glitchy
   HX Effects only—In rare cases, moving an Impulse Response block from Path A to Path B can cause a second IR block to reset its impulse selection
   Importing bundles containing Marketplace assets can take notably longer
   When manually engaging a rebuild presets command (holding FS1+2 or FS2+3), Helix can appear to freeze even though it doesn't. Wait 15-20 seconds for the rebuild to complete and all is well
   Loading a Distortion > Kinky Boost block can sometimes result in an audible thump
   HX Edit currently only supports one or two Helix or HX devices connected at the same time (true multi-device support is forthcoming)
   Wait, are you serious about the sharpie forehead, Schwarzenegger meme, and renaming 47 presets thing? No. This is why you always read the entire release notes


Lien de téléchargement:

[Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



HX Edit v2.60 Release Notes

Nouvelle mise à jour sortie le 02/07/2018!
HX Edit 2.60 “The Spring Cleaning Update”

New Amp Models (2)

   Cali Texas Ch1, based on* the clean channel of the MESA/Boogie®️ Lonestar
   Placater Clean, based on* the clean channel of the Friedman BE-100

New Effects Models (4)

   Distortion > Deranged Master (Mono, Stereo), based on* the Dallas Rangemaster Treble Booster—WARNING! Like the real thing, this model will take your head off! Works best before a distorted amp
   Distortion > Deez One Vintage (Mono, Stereo), based on* the BOSS©️ DS-1 distortion pedal (classic Made-in-Japan version)
   Distortion > Deez One Mod (Mono, Stereo), based on* the BOSS©️ DS-1 distortion pedal (Keeley mod version)
   Looper > 1 Switch Looper (Mono, Stereo), Line 6 original (doesn't leave Stomp mode)

* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.

Improvements/Changes

   The Looper block is now called “6 Switch Looper” (see Known Issues below)
   Variax Shuriken bank names now appear in the Input > Multi and Input > Variax block without requiring connection to Variax Workbench
   HX Edit now remembers its window size after disconnecting the Helix/HX device

New Features

   Full editor support for HX Effects—HX Edit now includes parameter, signal flow, bypass/controller assign, and Command Center editing for HX Effects
   Block Copy/paste between HX Edit and Helix Native—HX Edit now lets you copy and paste individual blocks between it and the Helix Native plugin
   Snapshot colors—HX Edit now lets you set footswitch colors for snapshots. Control-click on the camera icon and from the pull-down menu, select a color

Bug Fixes

   In some cases, copying/pasting or exporting/importing a preset can result in some blocks reflecting incorrect bypass states — FIXED
   Selecting a different model while the Customize window is open can cause the previous model’s name to be assigned to the footswitch — FIXED
   In rare cases, after clearing a controller assignment from a parameter, the preset cannot be saved properly — FIXED
   On MacOS, pressing Command-R to rename presets twice in a row can cause a graphical glitch and prevent the preset from being renamed — FIXED
   Modulation > Legacy > Analog Chorus > Mode parameter was mislabeled “CH Vib” — FIXED
   Pitch/Synth > Legacy > Smart Harmony > Key parameter was mislabeled “V1 Key” — FIXED
   Copying/pasting a Command Center > Instant or Footswitch command may not update the Command Center window — FIXED
   Copying/pasting a block does not copy/paste any MIDI bypass assignment — FIXED
   If a snapshot-controlled parameter value is changed, pressing Snapshot Up/Down switches on the hardware can cause the Command Center window to not update properly — FIXED
   Assigning MIDI bypass to a block would not display it in the Bypass/Controller assignment list — FIXED
   Loading a preset from HX Edit while selecting a snapshot from the hardware can result in an error message — FIXED
   In some cases, disconnecting and then reconnecting the hardware can cause the Presets and Impulses tab graphics to disappear until HX Edit’s window is closed and then reopened — FIXED
   When moving blocks along the signal flow in HX Edit, the Helix hardware could sometimes reflect an inaccurate bypass state — FIXED
   Helix, Helix Rack/Control, Helix LT only: In HX Edit, changing the cab model in an Amp+Cab block can clear controllers assigned to the Amp’s parameters — FIXED
   Helix, Helix Rack/Control, Helix LT only: Moving a Split or Merge block down to Path B while a None block is selected can sometimes cause HX Edit to crash — FIXED
   Helix, Helix Rack/Control, Helix LT only: Copying/pasting multiple presets in the MacOS version of HX Edit and then immediately sending MIDI clock to the hardware can sometimes cause it to crash — FIXED
   Helix, Helix Rack/Control, Helix LT only: On presets with an Input block on Path 1A, changing the (inactive) Split type can cause Inputs 1A and 2A to be fed the wrong signal — FIXED
   Helix, Helix Rack/Control, Helix LT only: When assigning the Guitar In-Z parameter to a footswitch, a custom name and LED color could not be applied — FIXED
   Helix LT only: Renaming a preset above the signal flow in HX Edit would not always update the preset name on Helix LT’s main display — FIXED
   HX Effects only: From the Impulses tab, attempting to clear an IR can sometimes result in an error message — FIXED
   Many other minor bug fixes, optimizations, and stability improvements

Known Issues

   Existing user presets containing the original 6-switch Looper block will continue to read “Looper” instead of “6 Switch Looper” until the model is changed and the preset is resaved. This is normal and does not affect operation
   HX Effects only: Connecting HX Effects to HX Edit after a Helix, Helix Rack/Control, or Helix LT has been connected can cause presets to not save correctly. WORKAROUND: Quit HX Edit, reboot HX Effects, and then restart HX Edit. This will properly restore device communication


Lien de téléchargement:

[Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



HX Edit v2.52 Release Notes

Nouvelle mise à jour sortie le 22/02/2018!

HX Edit 2.52 Release Notes

HX Edit 2.52 is a software update that includes fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

Bug Fixes
- A block's Bypass MIDI IN assignment is also deleted when clearing a controller assignment in Bypass/Controller assign menu-FIXED
- A block's Bypass MIDI IN assignment is reset to OFF after entering EDIT menu and then returning to the Bypass/Controller assign menu-FIXED
- [HX EFFECTS] Exporting/importing preset may not preserve path B output destination-FIXED
- Right-click to Restore Split or Merge does not return block to last position-FIXED
- Not all Bypass MIDI In assignments are deleted after selecting Clear All Assignments in Bypass/Controller assign menu-FIXED
- General stability improvements
- Other minor bug fixes and optimizations

Known Issues
- Helix LT: Changing a presets name from HX Edit is not immediately reflected on Helix LT's main LCD
- Shuriken Variax bank names do not appear correctly in the Input > Multi and Input > Variax block
- Variax Model may not properly display name change after changing Snapshot
- Tap tempo button can change HX Edit's displayed tempo while Helix is receiving MIDI Clock from an external source


Lien de téléchargement:

[Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



HX Edit v2.51 Release Notes

Nouvelle mise à jour sortie le 07/02/2018!

HX Edit 2.51 Release Notes

New Features
- HX Effects support: HX Effects can now utilize the HX Edit application as a preset librarian and IR loader. Full preset editing capability is coming to HX Edit Spring of 2018
- HX Effects IR Support: HX Effects can now load user and third-party Impulse Response (IR) files via the HX Edit application

- Full State Backup and Restore FOR HX Effects - HX Edit can perform a full state backup and restore of your HX Effects presets, IRs, and global settings. IMPORTANT! You MUST be running HX Effects firmware 2.50 or higher to use full state backup and restore!
From the File pulldown menu, select Create Backup Click [Create Backup] to confirm. To restore from a backup, from the File pulldown menu, select Restore From Backup From the Backup File pulldown, select the desired backup and click [Restore Backup]. You may choose to restore any combination of 8 setlists, IRs (including the index order), and/or Global Settings

Bug Fixes
- Helix LT: When moving split or merge blocks from within HX Edit, Performance view would close on Helix LT - FIXED
- General stability improvements
- Other minor bug fixes and optimizations

Known Issues
- In rare cases, block bypass states controlled by snapshots can be set incorrectly recalled when exporting and then importing presets in HX Edit
- Helix LT: Changing a presets name from HX Edit is not immediately reflected on Helix LT's main LCD
- Shuriken Variax bank names do not appear correctly in the Input > Multi and Input > Variax block


Lien de téléchargement:

[Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



Helix Editor v2.30 Release Candidate Notes

Nouvelle mise à jour sortie le 21/11/2017!

HX Edit 2.30 Release Notes
New Amps (7)
- Voltage Queen, based on* the Victoria®️ Electro King
- Derailed Ingrid, based on* the Trainwreck Circuits®️ Express
- Brit Trem Nrm, based on* the normal channel of the Marshall®️ Plexi Tremolo 50
- Brit Trem Brt, based on* the bright channel of the Marshall®️ Plexi Tremolo 50
- Brit Trem Jump, based on* the normal and bright channel (jumped) of the Marshall®️ Plexi Tremolo 50
- Cartographer, based on* the Ben Adrian Cartographer
- Agua 51, based on* the Aguilar®️ DB751 bass amp
New Effects (7)
- Distortion > Kinky Boost (Mono, Stereo), based on* the Xotic®️ EP Booster
- Distortion > Thrifter Fuzz (Mono, Stereo), Line 6 Original
- Dynamics > Kinky Comp (Mono, Stereo), based on* the Xotic®️ SP Compressor
- Modulation > Bleat Chop Trem (Mono, Stereo), based on* the Lightfoot Labs©️ Goatkeeper
- Modulation > Double Take (Mono, Stereo), Line 6 Original doubler
- Delay > Cosmos Echo (Mono, Stereo), based on* the Roland®️ RE-201 Space Echo
- Volume/Pan > Stereo Width (Stereo), Line 6 Original utility to collapse stereo paths
* All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6.
New Features
- Full State Backup and Restore—The all new HX Edit application can perform a full state backup and restore of your Helix, Helix Rack/Control, and Helix LT presets, IRs, and global settings. IMPORTANT! You MUST be running Helix firmware 2.20 or higher to use full state backup and restore! From the File pulldown menu, select “Create Backup…” Click [Create Backup] to confirm. To restore from a backup, from the File pulldown menu, select “Restore From Backup…” From the Backup File pulldown, select the desired backup and click [Restore Backup]. You may choose to restore any combination of 8 setlists, IRs (including the index order), and/or Global Settings
Show/Hide PRESETS/IMPULSES List—Click the icon to the left of the preset name to show or hide the PRESETS/IMPULSES list
Known Issues
- In rare cases, moving a block from Path A to Path B can result in the Split block being created in the wrong position
- In rare cases, importing an IR file into the current “Empty” slot of an Impulse Response block can cause audio output to mute Workaround: Drag impulse response files directly into the IMPULSES list


Lien de téléchargement:

[Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



Helix Editor v2.21 Release Candidate Notes

Nouvelle mise à jour sortie le 02/05/2017!

Helix Editor 2.21 Release Notes

Helix v2.21.0 is a software update that includes fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! IF YOU’VE ALREADY INSTALLED HELIX FIRMWARE 2.21 and HELIX EDIT 2.20, ALL YOU HAVE TO DO IS INSTALL HELIX EDIT 2.21.

IF YOU HAVE NOT INSTALLED HELIX FIRMWARE 2.21 and HELIX EDIT 2.20, YOU *MUST* FOLLOW THESE INSTRUCTIONS!

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, browsers, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs (if you want to keep them). For example, if you’re running Helix FW 1.12, your current Helix application version should be 1.12.

NOTE: You may want to back up individual Setlists so you can restore them to empty setlists without affecting the new 2.20 factory presets.

3. Quit the CURRENT EXISTING Helix editor application and download and install the LATEST Helix editor application (2.21), available here: [Vous devez être inscrit et connecté pour voir ce lien] This also installs the newest version of Line 6 Updater (1.11).

4. If you’re using Helix Rack with Helix Control, turn off Helix Control.

5. Using the latest Line 6 Updater (1.11), update Helix/Helix Rack to the newest firmware (2.21). At the end of the update process, Helix/Helix Rack will reboot automatically and begin rebuilding presets. Wait for this process to complete.

6. If you’re using Helix Control with Helix Rack, connect and power on Helix Control. The inspector will ask if you want to update its firmware. Press Knob 6 (OK). Wait for the update to finish.

YOU MUST RESET GLOBALS AND RESTORE PRESETS, OTHERWISE HELIX 2.21 WILL NOT WORK PROPERLY. DO IT. DO IT NOW:

7. To reset globals and restore presets, turn off Helix/Helix Rack.

HELIX FLOOR/LT ONLY: While holding footswitches 9 and 10 (middle two switches on the bottom row), turn on Helix. Wait for the message “Will reset Globals and restore stock Presets, Setlists and IRs…” to appear and let go.

HELIX RACK ONLY: While holding knobs 5 and 6 below the screen, turn on Helix Rack. Wait for the message “Will reset Globals and restore stock Presets, Setlists and IRs…” to appear and let go.

8. Using the NEW Helix editor application (2.21), restore the user presets you backed up in step 2.

Bug Fixes
- In rare cases, the editor could free when creating a mono or stereo Delay > Pitch Echo block -FIXED
- In rare cases, the editor could free when creating a mono or stereo Pitch/Synth > Simple Pitch or Dual Pitch block - FIXED
- In rare cases, Helix could freeze when accessing Global Settings while receiving MIDI Clock via USB - FIXED
- In rare cases, Helix can become unresponsive after copying specific block types onto another - FIXED
- A customized footswitch with multiple assignments could have its bypass states swapped after exporting the preset and then importing again - FIXED
- The forward slash character [/]could not be added to custom labels - FIXED
- Presets with many controller assignments may could occasionally not update the editor UI with those assignments - FIXED
- Other bug fixes and optimizations


Lien de téléchargement:

[Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]




Helix Editor v2.20 Release Candidate Notes

Nouvelle mise à jour sortie le 30/03/2017!

Helix Editor 2.20 Release Notes

Helix v2.20.0 is a firmware update that includes new amps, cabs, effects, features, fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! YOU *MUST* FOLLOW THESE INSTRUCTIONS TO INSTALL 2.20!

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, browsers, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs (if you want to keep them). For example, if you’re running Helix FW 1.12, your current Helix application version should be 1.12.

NOTE: You may want to back up individual Setlists so you can restore them to empty setlists without affecting the new 2.20 factory presets.

3. Quit the CURRENT EXISTING Helix editor application and download and install the LATEST Helix editor application (2.20), available here: [Vous devez être inscrit et connecté pour voir ce lien] This also installs the newest version of Line 6 Updater (1.11).

4. If you’re using Helix Rack with Helix Control, turn off Helix Control.

5. Using the latest Line 6 Updater (1.11), update Helix/Helix Rack to the newest firmware (2.20). At the end of the update process, Helix/Helix Rack will reboot automatically and begin rebuilding presets. Wait for this process to complete.

6. If you’re using Helix Control with Helix Rack, connect and power on Helix Control. The inspector will ask if you want to update its firmware. Press Knob 6 (OK). Wait for the update to finish.

YOU MUST RESET GLOBALS AND RESTORE PRESETS, OTHERWISE HELIX 2.20 WILL NOT WORK PROPERLY. DO IT. DO IT NOW:
7. To reset globals and restore presets, turn off Helix/Helix Rack.

HELIX FLOOR ONLY: While holding footswitches 9 and 10 (middle two switches on the bottom row), turn on Helix. Wait for the message “Will reset Globals and restore stock Presets, Setlists and IRs…” to appear and let go.

HELIX RACK ONLY: While holding knobs 5 and 6 below the screen, turn on Helix Rack. Wait for the message “Will reset Globals and restore stock Presets, Setlists and IRs…” to appear and let go.

8. Using the NEW Helix editor application (2.20), restore the user presets you backed up in step 2.

New Features
- Support for 22 new 2.20 models

Bug Fixes
- In very rare cases, corrupted presets containing a Volume/Pan > Volume Pedal block can cause volume to drop to 0% - FIXED

- Certain Roland keyboards constantly spit out active sensing MIDI messages (with no way to disable them), which could affect Helix’s MIDI transmission - FIXED

- The Channel Volume taper for the Archetype amp model was incorrect - FIXED

- Many other minor bug fixes and optimizations

Known Issues
- When changing snapshots from the Helix application, block redraws may appear slower than normal. This does not affect actual snapshot selection

- If a Variax guitar is connected to Helix, MIDI channel 16 should never be used, as channel 16 is how Variax Workbench communicates with the guitar. This is by design. On a related note, Variax Workbench should never be used while MIDI tracks are armed or playing back in your DAW

- In rare cases, Helix may freeze when very rapidly changing presets while receiving MIDI clock

- Never edit Helix presets while uploading/downloading Variax Workbench presets. The Helix application can lose connection


Lien de téléchargement:

[Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



Helix Editor v2.11 Release Candidate Notes

Nouvelle mise à jour sortie le 15/12/2016!

Helix Editor v2.11 Release Notes

Helix v2.11.0 is a software update that includes fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! YOU *MUST* FOLLOW THESE INSTRUCTIONS TO INSTALL 2.11!

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, browsers, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs (if you want to keep them). For example, if you’re running Helix FW 1.12, your current Helix application version should be 1.12.

NOTE: You may want to back up individual Setlists so you can restore them to empty setlists without affecting the 2.11 factory presets.

3. Quit the CURRENT EXISTING Helix editor application and download and install the NEW Helix editor application (2.11), available here: [Vous devez être inscrit et connecté pour voir ce lien] This also installs the newest version of Line 6 Updater (1.10).

4. If you’re using Helix Rack with Helix Control, turn off Helix Control.

5. Using the latest Line 6 Updater (1.10), update Helix/Helix Rack to the newest firmware (2.11). At the end of the update process, Helix/Helix Rack will reboot automatically and begin rebuilding presets. Wait for this process to complete.

6. If you’re using Helix Control with Helix Rack, connect and power on Helix Control. The inspector will ask if you want to update its firmware. Press Knob 6 (OK). Wait for the update to finish.

YOU MUST RESET GLOBALS AND RESTORE PRESETS, OTHERWISE HELIX 2.11 WILL NOT WORK PROPERLY. DO IT. DO IT NOW:

7. To reset globals and restore presets, turn off Helix/Helix Rack.

HELIX FLOOR ONLY: While holding footswitches 9 and 10 (middle two switches on the bottom row), turn on Helix. Wait for the message “Will reset Globals and
restore stock Presets, Setlists and IRs…” to appear and let go.

HELIX RACK ONLY: While holding knobs 5 and 6 below the screen, turn on Helix Rack. Wait for the message “Will reset Globals and restore stock Presets, Setlists and IRs…” to appear and let go.

8. Using the NEW Helix editor application (2.11), restore the user presets you backed up in step 2.

Bug Fixes

- After importing a pre-2.10 preset that contains snapshots, EXP 2 could disappear from the expression pedal’s scribble strip LCD - FIXED

- After importing a pre-2.10 preset with IR 127 or 128 loaded, corruption could occur - FIXED

- Bypass Assign > Wait defaults to 300ms from the hardware and 100ms when selected within the Helix edit application - FIXED

- Bypass Assign > Custom Label And Switch LED parameters do not apply to EXP 1/2/3 and Variax Vol/Tone, yet were visible - FIXED

- In rare cases when selecting a snapshot, the Input block could revert to None and become unresponsive - FIXED

- If continuous bypass assignments exist in a preset containing multiple snapshot states, in rare cases, some parameters could not recall correctly - FIXED

- General stability improvements

- Other minor bug fixes and optimizations

Known Issues

- When changing snapshots from the Helix application, block redraws may appear slower than normal. This does not affect actual snapshot selection

- Copying and pasting a block assigned to auto enable/bypass from the Helix editor may result in a “Cannot paste block” error message while the Helix hardware confirms the block was indeed pasted correctly. Workaround: Save the preset to re-sync the application


Lien de téléchargement:

[Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



Helix Editor v2.10 Release Candidate Notes

Nouvelle mise à jour sortie le 22/11/2016!

Helix Editor v2.10 Release Notes

Helix v2.10.0 is a software update that includes new features, fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! YOU *MUST* FOLLOW THESE INSTRUCTIONS TO INSTALL 2.10!

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, browsers, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs (if you want to keep them). For example, if you’re running Helix FW 1.12, your current Helix application version should be 1.12.

NOTE: You may want to back up individual Setlists so you can restore them to empty setlists without affecting the new 2.10 factory presets.

3. Quit the CURRENT EXISTING Helix editor application and download and install the NEW Helix editor application (2.10), available here: [Vous devez être inscrit et connecté pour voir ce lien] This also installs the newest version of Line 6 Updater (1.10).

4. If you’re using Helix Rack with Helix Control, turn off Helix Control.

5. Using the latest Line 6 Updater (1.10), update Helix/Helix Rack to the newest firmware (2.10). At the end of the update process, Helix/Helix Rack will reboot automatically and begin rebuilding presets. Wait for this process to complete.

6. If you’re using Helix Control with Helix Rack, connect and power on Helix Control. The inspector will ask if you want to update its firmware. Press Knob 6 (OK). Wait for the update to finish.

YOU MUST RESET GLOBALS AND RESTORE PRESETS, OTHERWISE HELIX 2.10 WILL NOT WORK PROPERLY. DO IT. DO IT NOW:

7. To reset globals and restore presets, turn off Helix/Helix Rack.

HELIX FLOOR ONLY: While holding footswitches 9 and 10 (middle two switches on the bottom row), turn
on Helix. Wait for the message “Will reset Globals and restore stock Presets, Setlists and IRs…” to appear and let go.

HELIX RACK ONLY: While holding knobs 5 and 6 below the screen, turn on Helix Rack. Wait for the message “Will reset Globals and restore stock Presets, Setlists and IRs…” to appear and let go.

8. Using the NEW Helix editor application (2.10), restore the user presets you backed up in step 2.

New Features
- Auto Enable/Bypass blocks from EXP 1/2/3 and Variax Volume/Tone Knobs—Processing blocks (such as Wah, Pitch Wham, etc.) can now be enabled/bypassed by simply moving EXP 1, EXP 2, EXP 3, or Variax’s Volume or Tone knob. Click the Bypass Assign tab. From the source pulldown menu (normally reads “None”), select the desired switch. When selecting a continuous controller as a switch, Position and Wait sliders appear.

- Bypass Assign > Position—Position determines the location in the Exp Pedal or Variax knob’s travel where the block is engaged. For example, if set to 1%, the block will turn off as soon as the pedal is moved to the heel position. If set to 99%, the block will only turn on when the pedal is moved to the toe position. To swap the on/off state regardless of position, click the small bypass icon above the selected block.

- Bypass Assign > Wait—Wait determines how long it takes after the Exp Pedal or Variax Knob is moved below the Position location before the block turns off. For example, you may not want the Wah to turn off instantly every time you hit the heel position during your big funk solo. Also, does your song really need a big funk solo?

- Block Bypass via MIDI—Individual processing blocks can now be enabled/bypassed via incoming MIDI CC messages. Click the Bypass Assign tab. Move the MIDI In slider to choose the desired MIDI CC. Incoming CC values 0-63 will turn the block off; values 64-127 will turn the block on. Note that some MIDI CCs are reserved for global functions and cannot be selected.

- Split > Y Balance parameters—The old Split > Y block sends both left and right signals to Paths A and B equally. 2.10 adds individual balance (pan) control of the signals sent to Path A and B.

- Snapshot Assign Shortcut—OPTION-click (Mac) or ALT-click (PC) any Home screen parameter to quickly assign its value to the Snapshots controller

- Unassign Controller Shortcut—SHIFT-OPTION-click (Mac) or SHIFT-ALT-click (PC) any Home screen parameter to instantly remove any controller assignment

- Exit Fullscreen Mode Shortcut—Press ESC to exit fullscreen mode

Improvements/Changes
- Added a Headroom parameter to Delay > Vintage Digital

- Split > Y can now be bypassed; when bypassed, the block sends both left and right signals to both paths equally (like the old Split Y block)

- Added forward slash [/] to list of characters for naming presets, setlists, snapshots, and Stomp mode custom labels

- Bypass Assign tab has been relabeled “Switch” to better reflect all values

- Tap Tempo no longer affects a preset’s dirty state

- If a user fails to read and follow the update instructions, Helix will cause their car radio to only play polka death metal every Thursday from 1-3pm PST

Bug Fixes

- If many MIDI program change messages are received while the editor is importing or exporting data, the editor can freeze and Helix can crash - FIXED

- Copying and pasting blocks on top of one another while in Pedal Edit mode can sometimes result in a blank scribble strip - FIXED

- General stability improvements

- Other minor bug fixes and optimizations

Known Issues
- When changing snapshots from the Helix application, block redraws may appear slower than normal. This does not affect actual snapshot selection

- Bypass Assign > Wait defaults to 300ms from the hardware and 100ms when selected within the Helix edit application

- Copying and pasting a block assigned to auto enable/bypass from the Helix editor may result in a “Cannot paste block” error message while the Helix hardware confirms the block was indeed pasted correctly. Workaround: Save the preset to re-sync the application


Lien de téléchargement:

[/url][Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



Helix Editor v2.01 Release Candidate Notes


Nouvelle mise à jour sortie le 20/07/2016!

Helix Editor v2.01 Release Notes

Helix v2.01.0 is a software update that includes fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! YOU *MUST* FOLLOW THESE INSTRUCTIONS TO INSTALL 2.01!

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs (if you want to keep them). If you’re running Helix FW 1.12, your current Helix application version should be 1.12.

NOTE: You may want to back up individual Setlists so you can restore them to empty setlists without affecting the new 2.01 factory presets.

3. Quit the CURRENT EXISTING Helix editor application and download and install the NEW Helix editor application (2.01), available here: [Vous devez être inscrit et connecté pour voir ce lien] This also installs the newest version of Line 6 Updater (1.09).

4. If you’re using Helix Rack with Helix Control, turn off Helix Control.

5. Using the latest Line 6 Updater (1.09), update Helix/Helix Rack to the newest firmware (2.01). At the end of the update process, Helix/Helix Rack will reboot automatically and begin rebuilding presets. Wait for this process to complete.

6. If you’re using Helix Control with Helix Rack, connect and power on Helix Control. The inspector will ask if you want to update its firmware. Press Knob 6 (OK). Wait for the update to finish.

YOU MUST RESET GLOBALS AND RESTORE PRESETS, OTHERWISE HELIX 2.01 WILL NOT WORK PROPERLY. DO IT. DO IT NOW:

7. To reset globals and restore presets, turn off Helix/Helix Rack.

HELIX FLOOR ONLY: While holding footswitches 9 and 10 (middle two switches on the bottom row), turn on Helix. Wait for the message “Will reset Globals and restore stock Presets, Setlists and IRs…” to appear and let go.

HELIX RACK ONLY: While holding knobs 5 and 6 below the screen, turn on Helix Rack. Wait for the message “Will reset Globals and restore stock Presets, Setlists and IRs…” to appear and let go.

8. Using the NEW Helix editor application (2.01), restore the user presets you backed up in step 2.

Improvements

- In addition to Tap Tempo, Snapshots and footswitches-as-controllers now also respect the Global Settings > Preferences > Tap Tempo Pitch setting

- 2.0 changed the default Guitar In-Z setting to “Auto” for new presets. Existing factory presets now also reflect this value

Bug Fixes

- Certain elaborate pre-2.0 presets with many controller assignments could sometimes fail to rebuild properly after updating from v1.x to v2.x firmware - FIXED

- Switch LED parameter was not responsive from the Controller Assign screen - FIXED

- In some cases, Ext Amp and Note On message states were ignored when exported and then reimported - FIXED

- The Helix > Preferences > Stereo IR Import setting was not remembered - FIXED

- Engaging key commands while presets, setlists, or IRs were loading/exporting could result in instabilities - FIXED

- General stability improvements

- Other minor bug fixes and optimizations

Known Issues

- The Distortion > Bitcrusher Bit Depth parameter appears as “undefined”; continues to work properly from the hardware


Lien de téléchargement:

[/url][Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



Helix Editor v2.00 Release Candidate Notes


Nouvelle mise à jour sortie le 06/07/2016!

Helix Editor v2.00 Release Notes

Helix v2.00 is an update that includes new models, features, fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! READ BEFORE INSTALLING 2.00!

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs (if you want to keep them). If you’re running Helix FW 1.12, your current Helix application version should be 1.12.

NOTE: You may want to back up individual Setlists so you can restore them to empty setlists without affecting the new 2.0 factory presets.

3. Quit the CURRENT EXISTING Helix editor application and download and install the NEW Helix editor application (2.00), available here:http://line6.com/software/ This also installs the newest version of Line 6 Updater (1.09).

4. If you’re using Helix Rack with Helix Control, turn off Helix Control.

5. Using the latest Line 6 Updater (1.09), update Helix/Helix Rack to the newest firmware (2.00). At the end of the update process, Helix/Helix Rack will reboot automatically and begin rebuilding presets. Wait for this process to complete.

6. If you’re using Helix Control with Helix Rack, connect and power on Helix Control. The inspector will ask if you want to update its firmware. Press Knob 6 (OK).

7. Turn off Helix/Helix Rack. HELIX FLOOR: While holding footswitches 9 and 10 (middle two switches on the bottom row), turn on Helix. HELIX RACK: While holding knobs 5 and 6 below the screen, turn on Helix Rack. Wait for the message “Will reset Globals and restore stock Presets, Setlists and IRs…” to appear and let go.

8. Using the NEW Helix editor application (2.00), restore the user presets you backed up in step 2.

New Features
- Snapshots—Select one of eight snapshots to instantly recall all block on/off states, up to 64 parameter values, certain Command Center values, and tempo. Any Delay, Reverb, or FX Loop block with its Trails parameter turned on will spill across snapshots seamlessly. Click the gray box below the large preset name and select the desired snapshot from the list. For more information, check out the new Helix Application Pilot’s Guide, available from the Help menu
- Copy/Paste Snapshots—Select the snapshot you want to copy, click the camera icon and select “Copy.” Select the snapshot you want to overwrite, click the camera icon and select “Paste”
- Rename Snapshots—Click the camera icon and select “Rename.” SHORTCUT: Click-hold the snapshot name
- Tempo Select—Click the Tempo box (to the left of TAP) and select Per Snapshot, Per Preset (the default), or Global
- Controllers to Variax Parameters—Controllers (including Snapshots) can now control/recall Variax parameters, so you can do cool stuff like toggle between two guitar models with a footswitch, control Variax’s tone knob with an expression pedal, assign a momentary footswitch to drop D, recall completely different tunings with each snapshot, and more. There’s nothing special to do; just assign a controller to Variax parameters like you would any other parameter
- Additional keyboard shortcuts:
    B: Displays and places focus on the EDITOR window - Bypass Assign panel
    Shift-Command-C (Win: Ctrl-Shift-C): Copies the currently selected snapshot to the clipboard
    Shift-Command-V (Win: Ctrl-Shift-V): Pastes copied snapshot to the currently selected snapshot
    Shift-Command-R (Win: Ctrl-Shift-R): Renames the currently selected snapshot

Other Improvements
- If a controller is assigned to a parameter, brackets now appear around the value (as on the hardware)
- The Footswitch Assign page has been renamed “Bypass Assign” to better describe current and potential future functionality
- The Helix Application Pilot’s Guide has been updated to 2.0. From the Help menu, select “Helix Application Pilot’s Guide”

Bug Fixes
- General stability improvements
- Minor bug fixes and optimizations

Known Issues
- Attempting to drag more than 128 IRs into the Helix app will load no IRs at all
- Brackets may continue to appear around controller-assigned values even after performing a Clear All Controllers procedure


Lien de téléchargement:

[/url][Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



Helix Editor v1.12 Release Candidate Notes

[url=/%0Aurl]
Nouvelle mise à jour sortie le 11/05/2016!

Helix Editor 1.12 is a free update that includes new fixes, stability improvements, and optimizations.

IMPORTANT! READ BEFORE INSTALLING ANY NEW SOFTWARE!

If you have already updated Helix or Helix Rack’s firmware to 1.12:

1. Install the 1.12 Editor update, available at [Vous devez être inscrit et connecté pour voir ce lien] Check the “Beta” box.

If you have NOT already updated Helix/Helix Rack’s firmware to 1.12, please follow the instructions below:

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs. If you’re running Helix FW 1.06 or 1.06.5, your current Helix application version should be 1.04. If you’re running Helix FW 1.10, your current Helix application version should be 1.11.

3. Quit the CURRENT EXISTING Helix application and download and install the NEW Helix editor (1.12), available here: [Vous devez être inscrit et connecté pour voir ce lien] This also installs the newest version of Line 6 Updater (1.09).

4. If you’re using Helix Rack with Helix Control, turn off Helix Control.

5. Using the new Line 6 Updater (1.09), update Helix (or Helix Rack) to the newest firmware (1.12.0). If you’re using Helix Rack with Helix Control, after Helix Rack has been updated, connect and power on Helix Control, and it will update automatically.

6. Using the latest Helix editor (1.12), restore all user presets and IRs.


NEW FEATURES

- Scribble strips and footswitch LED colors can now be customized from the Footswitch Assign, Controller Assign, and Command Center screens for any items assigned to a footswitch

- Processing blocks can be copied and pasted. Control-click (Win: Right-click) a block and select “Copy Block.” Control/right-click the destination location or block you want to overwrite and select “Paste Block.”

- Additional keyboard shortcuts:

H - Selects the Home tab

F - Selects the Footswitch Assign tab

C - Selects the Controller Assign tab

M - Selects the Command Center tab

G - Selects the Global EQ screen

P - Selects the Preset list

I - Selects the Impulse Responses list

A - Selects and cycles through Amp+Cab, Amp, and/or Preamp tonestacks

T - Tap Tempo

Space Bar - Toggles the currently selected block on and off

Tab - Toggles focus between the librarian and editor windows

Arrow Up/Down/Left/Right (Editor) - Selects the current block

Arrow Up/Down/Left/Right (Model List) - Navigates the model list

Arrow Up/Down (Librarian) - Navigates the preset or IR list

Enter/Return (Librarian) - Loads the selected preset

[,][.], [-][+] - Manually adjusts the most recently clicked slider

Shift-[,][.], Shift-[-][+] - Manually adjusts the most recently clicked slider faster

Command-C (Win: Control-C) - Copies the current block

Command-V (Win: Control-V) - Pastes the block

Command-S (Win: Control-S) - Saves the preset

Control-click (Win: Right-click) a slider - Allows for manually entering a value

Command-click (Win: Control-click) a slider - Resets to default value


OTHER IMPROVEMENTS

- Input > Multi and Input > Variax now displays a Variax Volume slider

- A light blue box surrounds either the librarian or editor panel, telling you which one is in focus; press Tab to toggle between them

- Block selection is now synchronized between Helix and the Helix editor

- A confirmation dialog now appears when attempting to clear all controllers

- Added graphics for Input > USB 3/4, USB 5/6, and USB 7/8

- Manually entering delay Time values is now accomplished in milliseconds, not seconds

- The Helix firmware indicator in the upper left corner now reads “Firmware”


BUG FIXES

- A USB port driver issue within OS X El Capitan precluded certain computers (namely MacBook Pros and iMacs from mid-2012) from allowing communication between Helix and the Helix Editor. Note: You must update OS X to El Capitan 10.11.4 - FIXED

- Quickly moving an expression pedal assigned to many parameters can sometimes cause disconnection with Helix on Windows 7 - FIXED

- Note sync was not assignable to a controller - FIXED

- Importing a bundle while streaming audio could cause the Helix editor to disconnect - FIXED

- Removing the last block on parallel path B would display a floating “None” block until a different block was selected - FIXED

- Certain menu sliders could behave erratically when a footswitch had eight items assigned - FIXED

- Moving blocks could automatically select EXP 2 if one of the blocks’ parameters defaulted to EXP 1 - FIXED

- Hardware and software could lose sync if a controller-assigned block was moved from Path 1A to 1B and back - FIXED

- The Looper block’s Footswitch Assign page displayed a momentary/latching slider - FIXED

- A couple effects parameters were incorrect or missing - FIXED

- Certain stereo delay models could display an incorrect Time parameter value - FIXED

- Helix editor would sometimes not open immediately after closing Line 6 Updater - FIXED

- General stability improvements

- Many other minor bug fixes and optimizations


Lien de téléchargement:

[/url][Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



[url=/url]
[/url]

Helix Application v1.11.1 Release Notes (Version Beta)

[url=/url]

Nouvelle mise à jour sortie le 05/04/2016!

Helix Application 1.11 is a public beta that includes new fixes, stability improvements, and optimizations.

IMPORTANT! READ BEFORE INSTALLING ANY NEW SOFTWARE!

If you have already updated Helix or Helix Rack’s firmware to 1.10:

1. Install the 1.11 Public Beta Editor update, available at [Vous devez être inscrit et connecté pour voir ce lien] Make sure the “Beta” box is checked, otherwise you won’t see 1.11.

If you have NOT already updated Helix/Helix Rack’s firmware to 1.10, please follow the instructions below:

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs. If you’re running Helix FW 1.06 or 1.06.5, your current Helix application version should be 1.04.

3. Quit the CURRENT EXISTING Helix application and download and install the NEW Helix application (1.11), available here: [Vous devez être inscrit et connecté pour voir ce lien] This also installs the newest version of Line 6 Updater (1.08).

4. If you’re using Helix Rack with Helix Control, turn off Helix Control.

5. Using the new Line 6 Updater (1.08), update Helix (or Helix Rack) to the newest firmware (1.10.0). If you’re using Helix Rack with Helix Control, after Helix Rack has been updated, connect and power on Helix Control, and it will update automatically.

6. Reset Helix’s global settings by holding footswitches 5 and 6 (top row) while booting. For Helix Rack, press and hold knobs 2 and 3 under the big LCD while booting.

7. Using the latest Helix application (1.11), restore all user presets and IRs.

Bug Fixes

- In some cases, when attempting to reload the same model for the selected Modulation, Delay, or IR block, the Helix application could quit - FIXED

- When two Cab > Single blocks are added after an amp and a Delay block is added after a Merge > Mixer block, the Helix application could quit - FIXED

- In some cases, it may be impossible to change a Preamp block’s model if another Preamp, Amp, or Amp+Cab block exists on a different path - FIXED

- In some cases, it could take several seconds to display parameters when selecting certain effects blocks - FIXED

- An Impulse Response > 2048-Sample IR block could still be added when Helix hardware could not accommodate it - FIXED

- The Helix application may not initially display Controller Assignment for Wah blocks - FIXED

- Wah blocks’ Position parameter was incorrectly labeled as “Pedal” - FIXED

- Editor displays the "assignments are full" error message after editing in Helix and Editor while both are in Command Center - FIXED

- General stability improvements

- Other minor bug fixes and optimizations

Other Improvements

- Split and Merge blocks now appear when rolling over with the mouse, making it easier to move them

Not Yet Implemented

- Customize scribble strip labels and LED colors

- Copy and paste blocks

Known Issues

- Helix Rack and the Helix application can lose connection after turning Helix Control off and on again while importing or exporting a bundle

- Graphics for Input > USB 3/4, USB 5/6, and USB 7/8 are missing

- Removing the last block on a parallel B path displays a floating “None” icon until a different block is selected

- Unassigned blocks may appear to have a Footswitch assigned in the editor, but not in the hardware


Lien de téléchargement:

[/url][Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



[url=/url]

[/url]

Helix Application v1.10 Release Notes (Version Beta)

[url=/url]

Nouvelle mise à jour sortie le 29/03/2016!

Helix Application v1.10 Public Beta Release Notes

Helix Application 1.10 is a public beta that includes new features, fixes, stability improvements, and optimizations.
IMPORTANT! READ BEFORE INSTALLING ANY NEW SOFTWARE!

1. Shut down all Line 6 software as well as any software that streams audio, including, but not limited to: iTunes, Spotify, DAWs, etc.

2. Use your CURRENT EXISTING Helix application to back up all of your presets and IRs. If you're running Helix FW 1.06 or 1.06.5, your current Helix application version should be 1.04.

3. Quit the CURRENT EXISTING Helix application and download and install the NEW Helix application (1.10.0), available here: [Vous devez être inscrit et connecté pour voir ce lien] This also installs the newest version of Line 6 Updater (1.08).

4. If you're using Helix Rack with Helix Control, turn off Helix Control.

5. Using the new Line 6 Updater (1.08), update Helix (or Helix Rack) to the newest firmware (1.10.0). If you're using Helix Rack with Helix Control, after Helix Rack has been updated, connect and power on Helix Control, and it will update automatically.

6. Reset Helix's global settings by holding footswitches 4 and 5 (top row) while booting. For Helix Rack, press and hold knobs 2 and 3 under the big LCD while booting.

7. Using the new Helix application (1.10.0), restore all user presets and IRs.

New Features

- New Edit View - Click a block and its parameters appear as sliders. Click and drag a block to reorder it. Click and drag a block on a serial path down to move it to a new parallel path

- New Footswitch Assign View - Click a block and its footswitch assignment parameters appear as sliders. Drag the Footswitch slider to assign a footswitch to the block

- New Controller Assign View - Click a block and its controller assignment parameters appear as sliders. Drag the Parameter slider to select the parameter you wish to control and drag the Controller Slider to assign a controller to it

- New Command Center View - Click an Instant (lightning bolt icon) command, footswitch, or expression pedal and from the pull-down menu to the right of the item name, select the desired command type. Scroll down to view parameters for the selected command

- New Global EQ View - Click the Global EQ tab at the top of the editor window. Click Reset to reset Global EQ. Click the standby icon to the right of the Reset button to turn Global EQ on and off

- Drag and Drop IRs - With an IR block selected in the Editor pane, drag & drop an IR from the Impulses list at the left directly onto the IR Select editor slider

- Bypass Block Shortcut - Press B on your computer keyboard to bypass/enable the selected block

- Clear Block Shortcut - Press Delete or Backspace on your computer keyboard to clear the selected block

- Full Screen Mode - Mac: Click the green dot in the upper left corner of the Helix Edit window to display everything full screen; Windows: Click the maximize icon in the upper right corner of the Helix Edit window to display everything full screen

- Resize Window - Drag the lower right corner of the window up, down, left, or right to resize the edit area

Not Yet Implemented

- Customize scribble strip labels and LED colors

- Copy and paste blocks

Known Issues

- From the Controller Assign tab, any Time or Speed parameters appear as Note Sync

- Helix Rack and the Helix application can lose connection after turning Helix Control off and on again while importing or exporting a bundle

- Input > Multi and Input > Variax Volume Knob parameter is missing

- Graphics for Input > USB 3/4, USB 5/6, and USB 7/8 are missing

- Removing the last block on a parallel B path displays a floating None icon until a different block is selected

- Unassigned blocks may appear to have a Footswitch assigned in the editor, but not in the hardware

- Keyboard shortcuts won't work if an item in the Librarian pane was clicked

- Importing a previously Exported preset does not use the exported title

- Footswitch and Controller UI sliders may jitter when moved over the Looper FS or an FS with 8 assignments

- App does not initially show Controller Assignment for Wah


Lien de téléchargement:

[/url][Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]

Helix Application v1.04 Release Notes



Nouvelle mise à jour sortie le 16/02/2016!

Helix Application 1.04 is a free software update that includes new features, fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! Before restoring your backed up presets to Helix, you must first install the latest 1.04 version of the Helix application!

Bug Fixes
- CC Toggle With Larger Dim Value Than Lit Value Not Restoring Properly Upon Export/Import
- Importing multiple IRs or Presets can crash app
- CC Toggle Dim and Lit States Switch After Exporting and Importing

Known Issues
- In rare cases, the Helix application may fail to connect when set to autolaunch on Mac OS X
- Importing or exporting a preset bundle while streaming audio may cause Helix to disconnect


Lien de téléchargement:

[Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



[url=/url]
[/url]

Helix Application v1.03 Release Notes

[url=/url]

Nouvelle mise à jour sortie le 26/01/2016!

Helix Application 1.03 is a free software update that includes new features, fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! Before restoring your backed up presets to Helix, you must first install the latest 1.03 version of the Helix application!

New Features

Supports newer preset format used by Helix firmware 1.06.0
Supports backup and restore of new Helix amp, distortion, modulation, filter and pitch models in 1.06.0
Now supports drag and drop of folder import of preset and IRs
Bug Fixes

General stability improvements
Stability improvements regarding operations with IRs
Other minor bug fixes and optimizations
Known Issues

In rare cases, the Helix application may fail to connect when set to autolaunch on Mac OS X
Importing or exporting a preset bundle while streaming audio may cause Helix to disconnect


Lien de téléchargement:

[/url][Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



[url=/url]

[/url]

Helix Application v1.02 Release Notes

[url=/url]

Nouvelle mise à jour sortie le 23/11/2015!

Helix Application 1.02 is a free software update that includes new features, fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! Before restoring your backed up presets to Helix, you must first install the latest 1.02 version of the Helix application!


New Features
- Supports newer preset format used by Helix firmware 1.04.1
- Supports backup and restore of new Helix delay models in 1.04.1


Bug Fixes
- General stability improvements
- Other minor bug fixes and optimizations


Known Issues
- Importing a setlist and then importing a bundle can cause the Helix app to disconnect
- In rare cases, the Helix application may fail to connect when set to autolaunch on Mac OS X


Lien de téléchargement:

[/url][Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



[url=/url]
[/url]

Helix Application v1.01 Release Notes

[url=/url]

Helix Application 1.01 is a free software update that includes new features, fixes, stability improvements, and optimizations. It is highly recommended that all Helix users perform this update!

IMPORTANT! Before restoring your backed up presets to Helix, you must first install the latest 1.01 version of the Helixapplication!

New Features

Added Windows 10 support
Bug Fixes

IRs with underscore characters (“_”) in the name may not load properly —FIXED
Preset names could not include an underscore (“_”) —FIXED
The Helix app could only import one IR file when clicking the Import button —FIXED
The Helix app could crash when importing 88.2 kHz IR files using Windows —FIXED
General stability improvements
Other minor bug fixes and optimizations
Known Issues

Importing a setlist and then importing a bundle can cause the Helix app to disconnect
In rare cases, the Helix application may fail to connect when set to autolaunch on Mac OS X


Lien de téléchargement:

[/url][Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]



Helix Application v1.00 Release Notes


This is the Helix application. It’s used to organize and backup your presets and setlists, and load third-party IRs (Impulse Responses) onto Helix.

The required Helix Driver is included in this app installer.

Lien de téléchargement:

[Vous devez être inscrit et connecté pour voir ce lien]

[Vous devez être inscrit et connecté pour voir ce lien]
avatar
Alexdreamworld
Admin
Admin

Date d'inscription : 25/10/2015
Localisation : France

http://line6helix.forumactif.org

Revenir en haut Aller en bas

Revenir en haut

- Sujets similaires

 
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum